Ph.D. Applications Open- Jan 2025
Click Here
Applications Open for Academic Session 2025-26
Click Here
Fee Payment (EMI)
GrayQuest Financepeer
Dr. Himanshu Payal

Dr. Himanshu Payal

Assistant Professor, Mechanical Engineering (ME)

Himanshu.payal@sharda.ac.in

About

Dr. Himanshu Payal is working with Mechanical Engineering Department, Sharda University since 2018. He has completed his PhD in the Department of Manufacturing Process and Automation Engineering from Netaji Subhas University of Technology Formerly (NSIT), New Delhi, India. He did his M.Tech in Industrial Engineering from Dr. B.R. Ambedkar National Institute of Technology (NIT) Jalandhar, Punjab and B.Tech from Beant College of Engineering and Technology, Gurdaspur (State Government Engineering College) Punjab, affiliated to Punjab Technical University, Jalandhar. He has a total of 14 years of research, teaching and industrial experience. He was awarded Teaching-Cum-Research fellowship from NSIT, New Delhi (2013-17). His area of current research is advanced machining and non-conventional machining process. He has published many articles in various international journals and conferences. He is a life member of Institute of Engineers India (IEI). Prior to joining Sharda University, He has worked for 5 years with Lovely Professional University (LPU) Jalandhar, Punjab.

Experience
  • 16 years
Qualification
  • Ph.D (NSUT,Dwarka,New Delhi),
  • M.Tech (NIT,Jalandhar),
  • B.Tech (Sardar Beant Singh State University, Punjab)
Award & Recognition

 

Student Awards

  • Teaching-cum-Research Fellowship (TRF) 2013-2017 at Netaji Subhas Institute of Technology, New Delhi, India.
  • The institute aims at identifying suitable candidates having a keen interest in teaching and research who would like to take up a career in Academics. In line with this objective, therefore, a scheme Teaching-cum-Research-fellowship has been introduced. Exceptionally brilliant candidates having keen interests in an academic career are considered for this fellowship.

Professional Awards

  • Excellence Award: Lovely Professional University (LPU) management honored me for my services given in department of Mechanical Engineering on completion of 5 years.
  • Session Chair, IEEE International Conference on Computing, Communication and Intelligent Systems organized by SET, Sharda University 18th-19th October 2019.
  • Received the award from the Innovation and Industry Growth-New approach by Indian Industries Association (IIA) on 12th September, 2019
  • Awarded Best Paper in 1st National Conference in Engineering Applications (NCEA-2011) with paper ID EA-214 Entitled An Overview of CAD/CAM with Respect to Mechanical Engineering at St. Soldier Institute of Engineering and Technology, Jalandhar, Punjab.
  • Won Gold Medal in Lawn Tennis at Intra college Tournament organized by P.T.U, Jalandhar, Punjab.
  • Won Second Prize in Employee Badminton Tournament at Sharda University representing Sharda School of Engineering and Technology.
     

 

Research

  1. Himanshu Payal, Sachin Maheshwari, Pushpendra S. Bharti  “Parametric Optimization of EDM Process for Inconel 825 Using GRA and PCA Approach” Journal of information and optimization, Volume  40, 2019 – Issue 2 pp 291-307. Taylor & Francis 
  2. Himanshu Payal, Sachin Maheshwari, Pushpendra S. Bharti, Satish Kumar Sharma “Multi-objective optimization of electrical discharge machining for Inconel 825 using a Taguchi-Fuzzy approach”. International Journal of Information Technology 2018, Volume 11, Issue 1, pp 97–105  Springer
  3. Himanshu Payal, Sachin Maheshwari, Pushpendra S. Bharti, “Effect of tool material on surface roughness in electrical discharge machining”. Journal of Production Engineering JPE (2016) Vol.19 (1) Novi Sad, ISSN 1821-4932, pp 27-30.
  4. Himanshu Payal, Sachin Maheshwari, Pushpendra S. Bharti “Parametric Optimization of EDM Using Multi-Response Signal-To-Noise Ratio Technique”. Journal of Production Engineering JPE (2016) Vol.19 (2) Novi Sad, ISSN 1821-4932, pp 33-37.
  5. Himanshu Payal, Sachin Maheshwari, Pushpendra S. Bharti “Process Modeling of Electric Discharge Machining of Inconel 825 Using Artificial Neural Network”. World Academy of Science, Engineering and Technology, International Journal of Mechanical, Aerospace, Industrial, Mechatronic, and Manufacturing Engineering,  doi: scholar.waset.org/1999.8/10006604, Vol-11, No-3,  pp. 517-521, 2017.
  6. Himanshu Payal “Analysis of tool material on metal removal rate in electric discharge machining”. Journal of Production Engineering JPE (2017) Vol.20 (2)   Novi Sad, ISSN 1821-4932, doi.org/10.24867/JPE-2017-02-021, pp 21-24.

Conference Publications

  1. Himanshu Payal, Sachin Maheshwari, Pushpendra S. Bharti  “Parametric Optimization of EDM Process for Inconel 825 Using GRA and PCA Approach” International Conference on Data Sciences, Security and Applications (ICDSSA 2019), 07-08th March, 2019, Bharati Vidyapeeths College of Engineering., New Delhi, India.
  2. Himanshu Payal, Satish Kumar Sharma, Aakash, Ashish Kumar, Avinash Kumar, Himanshu,. “Study of MRR and TWR in Electric Discharge Machining of AISI D2 Tool Steel”.  1st International Conference on Future Learning Aspects of Mechanical Engineering (FLAME - 2018) October 3rd – 5th , 2018 Organized by Department of Mechanical Engineering, Amity School of Engineering & Technology, Amity University Uttar Pradesh, Noida.
  3. Himanshu Payal, Sachin Maheshwari, Pushpendra S. Bharti, “Investigative Study on Metal Removal Rate and Tool Wear Rate in Electric Discharge Machining of H11 using Different Electrode material” 5th  International Symposium on Fusion of Science and Technology (ISFT) held in New Delhi from January 18-22, 2016.
  4. Himanshu Payal, Sachin Maheshwari, Pushpendra S. Bharti  “Process Parameter Optimization of Die Sinking EDM on Inconel 825 using Taguchi Method” International Conference on Advanced Production And Industrial Engineering 9-10 December 2016 At Delhi Technological University, Delhi, India (ISBN: 978-93-85909-51-1) pp.258-264.
  5. Himanshu Payal, Aakash, Ashish Kumar, Avinash Kumar, Himanshu, Pramendra Bajpai. “Experimental Investigation of MRR and TWR in D3 Tool steel using Using Die-sinking Electrical discharge Machining process”.  IVth International Conference on Production & Industrial Engineering (CPIE) 19-21 Dec 2016 at NIT Jalandhar, Punjab India (ISBN: 978-93-5267-403-9).
  6. Himanshu Payal, RK Garg, Anish Sachdeva “Investigation of surface integrity of Hot die steel after EDM”. International Conference on Advances in Material and Manufacturing Technology. 20-21 July 2011 Chitkara University.
  7. Karan Chopra, Dinesh Thakur, KS Kohli, Himanshu Payal “Experimental Investigation on EDM of EN-24”. National Conference on Impact of Management and Technological advancements in Technical Education and Industrial Sector. JSSIET, Kauli, Patiala Feb. 18-19, 2011, pp. 233-236.
  8. Rohit Kumar Sharma, Himanshu Payal “An overview of CAD/CAM with respect to Mechanical Engineering”. National Conference on Engineering Applications.  St. Soldier Institute of Engineering Technology and Management, Jalandhar, Punjab. 9th April 2011.

Books Chapter

  1. Himanshu Payal, Satish Kumar Sharma, “Study of MRR and TWR in electric discharge machining of AISI D2 tool steel” Advances in Industrial and Production Engineering pp 85-92, https://doi.org/10.1007/978-981-13-6412-9_8, Lecture Notes of Mechanical Engineering. (Springer)

Certifications

Refereed Journal Publications

  • Himanshu Payal, Endale Fekadu, Abhishek Bhattacharya, Saigeeta Priyadarshini, Akanksha Mishra, Optimization of machining parameters in EDM of Inconel 625 using Taguchi approach, Materials Today: Proceedings https://doi.org/10.1016/j.matpr.2023.01.223 (Scopus)
  •  Saigeeta Priyadarshini, Aman Prakash, Sanya Gupta, Akanksha Mishra, Himanshu Payal , Fabrication and characterization of epoxy solar glass Materials Today: Proceedings https://doi.org/10.1016/j.matpr.2022.11.046 2022 (Scopus) .
  • Asmita Singh Bisen, Himanshu Payal, Collaborative robots for industrial tasks: A review, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2021.09.263 (2021) (Scopus)
  • M.B. Muhammad, R. Chandra, H. Payal, “A method for shifting of cattle dung based biogas digester for enhanced anaerobic co-digestion of cattle dung with leaf litter of neem”, Biomass Conversion and Biorefinery. (2020). https://doi.org/10.1007/s13399- 020-01166-2., SCIE IF= 4.987
  • Himanshu Payal, Pushpendra S. Bharti, Sachin Maheshwari Divya Agarwal, “Machining Characteristics and Parametric Optimisation of Inconel 825 during Electric Discharge Machining”. Technical gazette ISSN 1330-3651(Print), ISSN 1848-6339, (2020) SCIE IF=0.644
  • Himanshu Payal, Sachin Maheshwari, Pushpendra S. Bharti “Parametric Optimization of EDM Process for Inconel 825 Using GRA and PCA Approach” Journal of information and optimization , Volume 40, 2019 – Issue 2 pp 291-307. , Emerging Sources Citation Index (ESCI)
  • Himanshu Payal, Sachin Maheshwari, Pushpendra S. Bharti, Satish Kumar Sharma “Multi-objective optimisation of electrical discharge machining for Inconel 825 using a Taguchi-Fuzzy approach”. International Journal of Information Technology 2018, Volume 11, Issue 1, pp 97–105 Scopus
  • Himanshu Payal, Sachin Maheshwari, Pushpendra S. Bharti, “Effect of tool material on surface roughness in electrical discharge machining”. Journal of Production Engineering JPE (2016) Vol.19 (1) Novi Sad, ISSN 1821-4932, pp 27-30.
  • Himanshu Payal, Sachin Maheshwari, Pushpendra S. Bharti “Parametric Optimization of EDM Using Multi-Response Signal-To-Noise Ratio Technique”. Journal of Production Engineering JPE (2016) Vol.19 (2) Novi Sad, ISSN 1821-4932, pp 33-37.
  • Himanshu Payal, Sachin Maheshwari, Pushpendra S. Bharti “Process Modeling of Electric Discharge Machining of Inconel 825 Using Artificial Neural Network”. World Academy of Science, Engineering and Technology, International Journal of Mechanical, Aerospace, Industrial, Mechatronic, and Manufacturing Engineering, doi: scholar.waset.org/1999.8/10006604, Vol-11, No-3, pp. 517-521, 2017.
  • Himanshu Payal “Analysis of tool material on metal removal rate in electric discharge machining”. Journal of Production Engineering JPE (2017) Vol.20 (2) Novi Sad, ISSN 1821-4932, doi.org/10.24867/JPE-2017-02-021, pp 21-24.

Conference Publications

  • Naveen J, Himanshu Payal, Prashant Chauhan “Modelling of Outsourcing risks of Client Organization for Information Technology Services”     ICCEMME 2023    9-11, February'2023 G.L. Bajaj Institute of Technology and Management. Gr. Noida.
  • Naveen J, Himanshu Payal, Prashant Chauhan “Modelling of Financial Challenges in Knowledge Process Outsourcing Industries”   ICCEMME 2023 9-11, February'2023 G.L. Bajaj Institute of Technology and Management, Gr. Noida.
  • Himanshu Payal   Fabrication of Smart Gardening System, 3rd International Conference on Functional Materials, organized by Division of Research and Development, Lovely Professional University, Punjab 2022 Manufacturing and Performances (ICFMMP-2022)” held on July29-30th
  • Himanshu Payal, Sachin Maheshwari, Pushpendra S. Bharti “Parametric Optimization of EDM Process for Inconel 825 Using GRA and PCA Approach” International Conference on Data Sciences, Security and Applications (ICDSSA 2019), 07-08th March, 2019, Bharati Vidyapeeths College of Engineering., New Delhi, India.
  • Satish Kumar Sharma, Dinesh W Rathod, Sachin Maheshwari and Himanshu Payal “Investigation of weld bead shape parameters in relation to heat input during submerged arc welding”. Vth International Conference on Production & Industrial Engineering (CPIE) 8-10 June 2019 at NIT Jalandhar, Punjab India.
  • Himanshu Payal, Satish Kumar Sharma, Aakash, Ashish Kumar, Avinash Kumar, Himanshu,. “Study of MRR and TWR in Electric Discharge Machining of AISI D2 Tool Steel”. 1st International Conference on Future Learning Aspects of Mechanical Engineering (FLAME - 2018) October 3rd – 5th , 2018 Organized by Department of Mechanical Engineering, Amity School of Engineering & Technology, Amity University Uttar Pradesh, Noida.
  • Himanshu Payal, Sachin Maheshwari, Pushpendra S. Bharti, “Investigative Study on Metal Removal Rate and Tool Wear Rate in Electric Discharge Machining of H11using Different Electrode material” 5th International Symposium on Fusion of Science and Technology (ISFT) held in New Delhi from January 18-22, 2016.
  • Himanshu Payal, Sachin Maheshwari, Pushpendra S. Bharti “Process Parameter Optimization of Die Sinking EDM on Inconel 825 using Taguchi Method” International Conference on Advanced Production And Industrial Engineering 9-10 December 2016 At Delhi Technological University, Delhi, India (ISBN: 978-93- 85909-51-1) pp.258-264.
  • Himanshu Payal, Aakash, Ashish Kumar, Avinash Kumar, Himanshu, Pramendra Bajpai. “Experimental Investigation of MRR and TWR in D3 Tool steel using Using Die-sinking Electrical discharge Machining process”. IVth International Conference on Production & Industrial Engineering (CPIE) 19-21 Dec 2016 at NIT Jalandhar, Punjab India (ISBN: 978-93-5267-403-9).
  • Himanshu Payal, RK Garg, Anish Sachdeva “Investigation of surface integrity of Hot die steel after EDM”. International Conference on Advances in Material and Manufacturing Technology. 20-21 July 2011 Chitkara University.
  • Karan Chopra, Dinesh Thakur, KS Kohli, Himanshu Payal “Experimental Investigation on EDM of EN-24”. National conference on Impact of Management and Technological advancements in Technical Education and Industrial Sector. JSSIET, Kauli, Patiala Feb. 18-19, 2011, pp. 233-236.
  • Rohit Kumar Sharma, Himanshu Payal “An overview of CAD/CAM with respect to Mechanical Engineering”. National Conference on Engineering Applications. St. Soldier Institute of Engineering Technology and Management, Jalandhar, Punjab. 9th April 2011.

Books Chapters

  • Himanshu Payal, Satish Kumar Sharma, “Study of MRR and TWR in electric discharge machining of AISI D2 tool steel” Advances in Industrial and Production Engineering pp 85-92, https://doi.org/10.1007/978-981-13-6412-9_8, Lecture Notes of Mechanical Engineering. (Springer)
  • Satish Kumar Sharma, Dinesh W Rathod, Himanshu Payal, Sachin Maheshwari Investigation of Weld Bead Shape Parameters in Relation to Heat Input During Submerged Arc Welding Manufacturing Engineering: Select Proceedings of CPIE2019 (Lecture Notes on Multidisciplinary Industrial Engineering) Springer 329-340 (2020)
  • Naveen J, Himanshu Payal   An ISM approach for cost factors in a product lifecycle costing, Proceeding of the 2 nd International Conference on technology innovations in mechanical engineering (TIME-2022) 9 th-10th February 2022, ISBN 978-93-92787-18-8.
  • Arpita Asthan, Himanshu Payal  Industry 4.0 and its Technological Enablers: A Review  , Proceeding of the 2 nd International Conference on technology innovations in mechanical engineering (TIME-2022) 9 th-10th February 2022 ,ISBN 978-93-92787-18-8.
  • Manasa.S, Sumek Nayan Jha , Himanshu Payal, Arduino Based 6-Axis Mini Industrial Robotic Arm. Proceeding of the 2 nd International Conference on technology innovations in mechanical engineering (TIME-2022) 9 th-10th February 2022 ,ISBN 978-93-92787-18-8

Patents

  • Total 05 Patents Granted 
  • Workshop, Seminar, Webinar, Summer School & FDP Attended
  • Faculty Development Program on Material Science 23rd June 2011 to 28th June 2011 LPU, Jalandhar, Punjab
  • Faculty Development Program on Engineering Mechanics 16th July 2012 to 20th July 2012, LPU, Jalandhar, Punjab.
  • Workshop Air Pollution control in Industries 24th February 2012 NIT, Jalandhar
  • Short Term Training Program on Advanced Engineering Optimization through Intelligent Techniques (AEOTIT) 27th January 2014 to 31 January 2014 SVNIT, Surat, Gujrat.
  • Refresher Course on Numerical Methods and MATLAB June 29th –July 11, 2015. Netaji Subhas Institute of Technology, Dwarka, New Delhi.
  • One week TEQIP sponsored FDP on "Recent Development and Challenges in Materials and Manufacturing Processes" in department of Mechanical Engineering, DTU Delhi from 25th July to 29th July 2016
  • Artificial Intelligence in Engineering Applications 26th -30th December 2016 in the Division of Instrumentations and Control Engineering at Netaji Subhas Institute of Technology, Dwarka, New Delhi.
  • Workshop on Research Methodology and Scientific Writing from 15-17th March 2017 in Division of Computer Engineering, Netaji Subhas Institute of Technology, New Delhi.
  • One week TEQIPIII sponsored FDP on "Innovative Products: Conceptualisation to Commercialisation" in department of Mechanical and Industrial Engineering at IIT Roorkee from 25th June to 29th June 2018.
  • Workshop on “Grant writing and management”, from 26 – 28th November 2018 at Jawahar Lal Nehru University (JNU) Convention Centre New Delhi.
  • Attended Faculty development Programme (FDP) on " Innovation in Mechanical Design and manufacturing" on 25th to 27th October, 2018 by department of Mechanical Engineering
  • Attended and Participated in a Short Course “MOOC: WHAT WHY HOW” organized by RTDC on 30th March 2019.
  • Attended Seminar by confederation of Indian industry (CII) on “Powering your rooftops”.
  • Attended one day training at BMW SKILLNEXT , 3rd Dec 2019 Gurugram
  • Attended Two Weeks Faculty development Programme on Entrepreneurship organized by TBI-KIET, Ghaziabad from 16/12/2019 to 30/12/2019.
  • Attended three day Webinar series on Electrical Solar Vehicle Project from 17th April to 19th April 2020
  • Attended one day Webinar on Challenges of Post Covid 19 Era: Discover the Power to change your life for good from 10th May 2020.
  • Atteneded    One week Short Term course on Additive manufacturing with Interdisciplinary applications organized by NIT Jalandhar from 29th June-3July 2020
  • 6days FDP on Welding for Additive Manufacturing 10June-15june 2020
  • Recent Advances in Material Characterization (23/05/2020 to 28/05/2020 ) National   Institute of Technical Teachers Training and Research Chandigarh
  • Advances in Thermo-Fluids and Turbomachines (06/06/2020 -10/06/2020) Satyug Darshan Institute of Engineering & Technology, Faridabad

Area of Interest

  • Advance Manufacturing Processes
  • Machining Science
  • Industrial Engineering